“12V 5M Mini DC Brush Water Pump” has been added to your cart.
View cart
Showing 1–16 of 108 results
-

14,00 €
Features & Specifications Current: 250mA Voltage: 12V DC Pressure: 0-0.8MPa Operation Mode: Normally closed Fluid Temperature: 1-100℃ Maximum Size: 84 x 53 x 41mm Diameter of Screw: 19mm Length of Screw: 17mm Diameter of Connector: 14mm Valve Type Diaphragm(operated by servo) Usage Water and low viscosity fluids The valve is suitable for automation of pouring…
-

1,00 €
1/4 Inch Plastic Misting Nozzle Sprinkler
-

16,90 €
10A 12V Intelligent PWM Solar Panel Charge Controller Auto Battery Regulator
-

14,90 €
12V 5M Mini DC Brush Water Pump
-

11,00 €
Specifications:
Input: 110V – 240V 50/60Hz (Worldwide AC input type)
Output: 19V 2.1A
Plug Size: 4.0mmx1.7mm
Adapter Size: 11.2*5.1*2.9cm
Cable Length: 114cm
-

14,60 €
The board has two digital inputs Rel1, Rel2 , which can be controlled by Digital output 3.3V or 5.0V. Every input can turn On/Off corresponding relay on the board. The especially of the board is, that when the relay is Turn ON, the corresponding connector output of the board gets 12V (the output is not…
-

19,60 €
The board has four Load relays. Every relay is controlled by 12V on the corresponding board input Rel1..Rel4. The normal open contact of every relay is leaded to the corresponding connector Rel1 NO..Rel4 NO. The used relay is Omron G6D-1A-ASI-DC12, with max to 5A current of the contacts;
-

21,60 €
The board has four Load relays. Every relay is controlled by 12V on the corresponding board input Rel1..Rel4. The normal open contact of every relay is leaded to the corresponding connector Rel1 NO..Rel4 NO. The used relay is Omron G2RL-2 DC12, with max to 8A current of the contacts;
-

6,50 €
Features & Specifications The current sensor model: ACS712ELC 5v power supply, Onboard power light indicator Module can measure +5 or -5 current, corresponding to the analog output of 185 mv/A When no current through the test, the output voltage is the VCC/ 2 Size of the PCB board: 31 x13 (mm) (mm) ACS712 is based…
-

7,20 €
5M Watering Tubing PVC Hose Pipe 4/7mm Dripper Irrigation System
-

29,50 €
The board has 8 digital inputs Rel1..Rel8 , which can be controlled by Digital output 3.3V or 5.0V. Every input can turn On/Off corresponding relay on the board. The especially of the board is, that when the relay is Turn ON, the corresponding connector output of the board gets 12V (the output is not normal…
-

0,95 €
Adjustable Inserted Dripper Head 360 Degree Garden Plant Watering Eight Outlet Sprinklers
-

6,50 €
Linear power supply based on 7812. The advantage of the board are two output connectors connected in parallel, so more devices can be easy connected to the board: – Output voltage: 12V – Max input voltage: 30V – Max current: 0.5A
-

6,50 €
Linear power supply based on 7805. The advantage of the board are two output connectors connected in parallel, so more devices can be easy connected to the board: – Output voltage: 5V – Max input voltage: 25V – Max current: 0.5A
-

6,90 €
Linear power supply based on 7805. The advantage of the board are two input and two output connectors connected in parallel, so more devices can be easy connected to the board. – Output voltage: 5V – Max input voltage: 30V – Max current: 0.5A
-

29,50 €
AltonaLab Air pressure sensor is an easy to use board, which works in range -15kPa ~ 115kPa, Accuracy: 1.5%. The board has a connector with three screws – ground, power +5V and signal output. The measured output voltage Vout of the sensor can be converted to kPa pressure using the expression below: P = Vout/0.0045…