Soil Humidity Probe
8,20 €The probe is produced using stanley steel electrodes, which has to be inserted into the soil. The probe is designed for Soil Humidity Sensor. The probe has 1 meter cable.
Showing 81–96 of 108 results
-
-
Soil Humidity Sensor
11,90 €The sensor has an analog output 0..5V. It converts the soil resistance to voltage. The sensor has to be connected to Soil probe, which to be inserted into the soil. The sensor’s output can be monitoring by ADC. AltonaLab software has a block SoilHumiditySensor, which convert the voltage measured from the sensor’s output to soil…
-
Soil Hygrometer Humidity Detection Moisture Sensor
6,90 €Features & Specifications When the soil is dry, the module outputs is in high level. The sensor is suitable for automatic watering system. Operating voltage: 3.3V~5V. Adjustable sensitivity (shown in blue digital potentiometer adjustment) Dual output mode,analog output more accurate. A fixed bolt hole for easy installation. With power indicator (red) and digital switching output…
-
Sound Detection Sensor Module Electret Microphone, LM393 Chip
8,90 €Features: The product boast of output signal instruction. Single-channel signal output. Output valid signal is low and the light will be bright. Specification: Weight: 4g Size: 3.1 x 1.6 x 0.8cm Operating current pressure: 4V – 6V
-
-
-
-
-
-
Water level sensor
11,50 €A presence of a water can be monitoring very easy with this Water level sensor board. Just use two wires placed in a water tank. Connect the other end of the wires to the board connector GND..Probe. If the wires are contacted with water, then the output signal of the board will be at high…
-
Waxwing – Spartan 6 Mini Module
124,90 €Waxwing is an easy to use FPGA module featuring Xilinx Spartan-6 FPGA. This module features Xilinx XC6SLX series FPGA in CSG324 package. This module takes care of FPGA, Configuration, DDR and power so you can invest more time and effort on your application specific aspects of the hardware development. The module is pre-populated with 512Mb DDR memory and 128Mb SPI flash for FPGA configuration. A large number of IOs and important signals including JTAG are available on the high pin count low profile connectors (DF40C-90DP) on the back side of the module. Numato has made available carrier boards and development boards that can be used for evaluation and development with this FPGA module. Â At only 40mm x 36.5mm size, this module packs a lot of power in such a small footprint. Customization services available for OEM customers.
-
Waxwing Spartan 6 FPGA Development Board
183,90 €Waxwing Spartan6 Development Board is a low cost FPGA development board with a lot of features including DDR SDRAM, 100M Ethernet, AC97 codec and DVI-D. Waxwing Development Board features Waxwing Xilinx Spartan-6 FPGA Mini Module with high density connectors for external IO interface. This Development board makes it easy to evaluate and build solutions with Waxwing Spartan 6 FPGA module. The Development board also provides easy access to JTAG signals on a standard Xilinx Platform Cable compatible header.
-
Weather monitoring station
2 890,00 €A station for weather monitoring:
- Air temperature and humidity;
- Air pressure;
- Wind speed and direction;
- Rain;
- WEB cam;
Can be added additional sensors for sea temperature, soil temperature, air quality;
For any questions, please ask us.
-
YZC-133 5kg Kitchen Scale Electronic Load Cell Weighing Sensor
7,50 €Features & Specifications Easy to use Driver voltage: 5-10V Force variation output: voltage signal Size: 12.7 x 12.7 x 75mm
-
Z83 II Intel Atom x5-Z8350, 2GB RAM, 32GB ROM
120,00 €Perfect for home automation and small industrial applications with AltonaLab SCADA software.
-
Numato 8 Channel USB GPIO Module with Analog Inputs
39,90 €Numato 8 Channel USB GPIO module is low cost easily deployable solution for connecting your PC to other electronic circuitry through USB. No USB specific knowledge is required to set up and use this module.
Numato 2 Channel Bluetooth Relay Module 
