“1/4 Inch Plastic Misting Nozzle Sprinkler” has been added to your cart.
View cart
-

14,00 €
Features & Specifications Current: 250mA Voltage: 12V DC Pressure: 0-0.8MPa Operation Mode: Normally closed Fluid Temperature: 1-100℃ Maximum Size: 84 x 53 x 41mm Diameter of Screw: 19mm Length of Screw: 17mm Diameter of Connector: 14mm Valve Type Diaphragm(operated by servo) Usage Water and low viscosity fluids The valve is suitable for automation of pouring…
-

1,00 €
1/4 Inch Plastic Misting Nozzle Sprinkler
-

14,90 €
12V 5M Mini DC Brush Water Pump
-

7,20 €
5M Watering Tubing PVC Hose Pipe 4/7mm Dripper Irrigation System
-

0,95 €
Adjustable Inserted Dripper Head 360 Degree Garden Plant Watering Eight Outlet Sprinklers
-

0,32 €
For standard inner diameter 8-9mm tubing capillary hose(8/11mm)tubing capillary hose.
-

3,30 €
Garden Water Hose Quick Connector Fitting
-

7,90 €
Hall Water Flow Sensor Flowmeter Water Control 1-30L/min 2.0MPa
-

0,59 €
Hose Nozzle Tee Connectors Drip Irrigation Tool For 4/7mm Hose
-

3,90 €
DC Motor Pump : – Power supply: 4.5V – Capacity: 80-100 Liters/H
-

7,20 €
Input voltage (InVCC): 5~24 V DC Current consumption: 5mA Output mode: High and low level (5-24V) NPN output: 300mA response time: 500mS Working environment temperature: 0~105 C Suitable for object detection
-

8,20 €
The probe is produced using stanley steel electrodes, which has to be inserted into the soil. The probe is designed for Soil Humidity Sensor. The probe has 1 meter cable.
-

11,90 €
The sensor has an analog output 0..5V. It converts the soil resistance to voltage. The sensor has to be connected to Soil probe, which to be inserted into the soil. The sensor’s output can be monitoring by ADC. AltonaLab software has a block SoilHumiditySensor, which convert the voltage measured from the sensor’s output to soil…
-

11,50 €
A presence of a water can be monitoring very easy with this Water level sensor board. Just use two wires placed in a water tank. Connect the other end of the wires to the board connector GND..Probe. If the wires are contacted with water, then the output signal of the board will be at high…